Lollipop 5.1.1 Update version G925FXXU2BOFM on Galaxy S6 Edge G925F

Another Android  5.1.1 Lollipop update arrived on Galaxy S6 Edge (SM-G925F) dubbed with build version G925FXXU2BOFM.  The latter is now officially sends out by Samsung to those who owns the unbranded Galaxy S6 Edge in Netherlands. Looking at the firmware build itself, it  is quite seems very similar build to the recent  G925FXXU2BOFJ  5.1.1 version that has just been rolled out in European region. Noting that Netherlands hasn't  received the former 5.1.1 update so this could be their own version next to the previous Android 5.0.2 G925FXXU1AOE3, but it has the same Lollipop features you may find on it.

Here's what the technical details says about the G925FXXU2BOFM 5.1.1 update:

Device name: Galaxy S6 Edge
Model number: SM-G925F
Android version: 5.1.1
Baseband version: G925FXXU2BOFJ
Kernel Version: 3.10.61-5012324
Build Number: LMY47X.G925FXXU2BOFM
other info:
Build date: June 22,  2015
AP: G925FXXU2BOFM
CSC: G925FPHN2BOFM
CP: G925FXXU2BOFJ


The G925FXXU2BOFM Android 5.1.1 update is held available via Over-The-Air (OTA) update which weighs a hefty files size of around 700 MB. It can also be downloaded using  Smart Switch if you want to manually upgrade by connecting your Galaxy S6 Edge into a  computer.  Again, the update is now only available for unbranded or unlocked Galaxy S6 Edge users in The Netherlands.

How to update on Samsung Galaxy S6 Edge SM-G925F to Lollipop 5.1.1

Follow these important steps before performing the software update. There are also some useful insights and why you should follow this procedures to safely keep your Galaxy S6 Edge in a much safer way while performing software update.

Ensure your Galaxy S6 Edge is recharge – While performing software update on Galaxy S6 Edge it may only takes just a couple of minutes but sometimes it may take longer. It will depend on how small or large the update size is, but most cases it also affects the speed of your data connection. Slower WiFi data connection may take longer while a stronger data connection is more speedy. A 40% to 50% recharged battery is enough but a fully recharged is way much better. Since we cannot determine how what the exact time we need to consume when initiating the firmware update so we should make sure our device has still enough battery remaining power to avoid any fatal issues. Have you ever heard or encountered those fellas who ended their devices into soft-bricks? A device was just stuck on Samsung logo or welcome screen and can’t reboot normally, those are what we called soft-bricks. And most probably caused by an inadequate battery power while performing the software update.

Do not forget to back up all of the important data – Even though there are no any data that are going to be deleted right after performing software update. But what if the software update went wrong, the update unexpectedly fails and then the phone becomes unresponsive and then it forces you to perform a wipe data/factory that basically wipes your phone’s memory storage just to resolve the issue. So you should backup your important files, including contacts, messages, call log, photos, videos, music, and apps. You cannot recover these files if somehow accidentally deleted when the software update goes wrong.

Your Galaxy S6 Edge must still runs on the official software version and hasn’t been rooted nor installed with non-official firmware update – Just in-case you just need to know that a rooted and a modified Galaxy S6 Edge will not get official software update anymore from Samsung and either to which carrier providers it came from. It will not allow users to install the update as it might harm the device once the update has made. So a rooted and modified Galaxy S6 Edge usually receives this warning message instead, that says: ‘The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.‘.

Update the Galaxy S6 Edge via Firmware Over-The-Air (OTA)

This is the usual method on how to check and to perform an update on S6 Edge to the latest software version. This method is what we called Firmware Update Over-The-Air and so-called as FOTA or simply OTA update. In most often cases a notification message will directly sent to you by your network provider and by Samsung itself, telling you that there is a new update that has now available for download. This approach requires you to prepare a strong WiFi connection, and so it might happened sometimes that one did not receive any software update notification messages; 1) if and when the device is out of range during the software update roll out period, 2) Automatic update has been turned off in the device Settings.
However, We can still manually check for the update instead.
Here’s how to do it manually:

  • In your Galaxy S6 Edge Home screen tap on Apps.

  • Select the Settings gear icon.

  • Tap About device.

  • Tap Software update.

  • Tap Check for update.

It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Download and Install now if you do so or else Install later if you want to get the update in later time.

But if ever you might have had receive this message while checking software update that says something like “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.” This is a warning message that only appears for those devices that has been rooted and installed with modified and unofficial firmware. So to be able to get the Software OTA update again, you must unroot your Galaxy S6 Edge first and removed any modification that has been installed on it.

Update the Galaxy S6 Edge Thru Samsung Smart Switch


You can use Smart Switch to update your Galaxy S6 Edge software to the latest versions.  It can also be used if the Software Over-The-Air update fail for some reason. The Smart Switch is way similar to the before Samsung Kies that had been used on several devices.


Download Smart Switch for PC

You have to choose the one that is specifically built for computer, depends of what you have either a PC or Mac.  Once you installed Smart Switch, all you need is connect your Samsung Galaxy S6 Edge into the computer using the supplied USB data cable.

1. Run Smart Switch in your computer.

2. Connect the Galaxy S6 Edge  into the computer using the supplied USB data cable.

3. Smart Switch will automatically prompt you if the update is available. Just click on the “update” then the “OK”  button to begin updating your Galaxy S6 Edge.

If it doesn’t tells you about an update, you may manually navigate through its settings by doing these procedures below.

4. Click on the “More” button at the right top of Smart Switch. You will then presented an options.  Choose “Preferences”  in the drop-down. You are then presented with two tabs the Backup file and  Software Update.  The backup file allows you to allocate a certain folder where you want your  backup files to be stored. Then on the other hand the Software Update tab is where you can set it to the Latest Software Pre-Download Settings.  Just mark the check-box where it says  Latest Software Pre-Download.

5. Select the “Backup” button, to safely kept your important data and files such as contacts, messages, call log, videos, music, photos, application and more.  The back up data files will be stored in the  documents folder of your computer. This is a very important steps as it wipes out all of it while performing the software update process. All data will permanently deleted and it cannot be recovered, so ensure to create a backup first before it’s too late than sorry.

6. Click on the “More” button again.  Choose “Emergency software recovery and initialization” in the drop-down option.

Choose the “Software Update and Initialization” tab.
Wait for a couple of seconds as it check the current software version of your Galaxy S6 Edge and then check for the latest software update version to initialized.  You may then simply follow the on-screen instructions that ask you to click the “OK” or a “Cancel”button.

Once the Software update initialization started you must not  interrupt the process like unplugging  the data cable connected to the computer nor turning off the device. You must wait until it says “Software update and Initialization are complete”.

Once your Galaxy S6 Edge reboots disconnect it from the computer. Then reconnect it back again.

7. Lastly restore the backup, choose “Restore” button to restore the previously created  backup files.

That’s all! Just let us know if you already got the Android 5.1.1 update on your Galaxy S6 Edge.