Update Build G925FXXU2COH5 to African Countries Galaxy S6 Edge SM-G925F

African owners of the Samsung Galaxy S6 Edge SM-G925F has received another Android 5.1.1 update to build G925FXXU2COH5. The G925FXXU2COH5 update has replaced the previous build G925FXXU2BOGB and brings nothing more but several improvements, bug fixes, enhancements to features, and for the device stability and performance. The update is officially rolling out via Over-The-Air (OTA) and thru Smart Switch and seen available in Kenya, South Africa. Also, a guy from Saudi Arabia who tipped us mentioned that he also received the said G925FXXU2COH5 few days earlier.

Here is what the technical details stated on G925FXXU2COH5 update:
Device: Samsung Galaxy S6 Edge
Model number: SM-G925F
Android version: 5.1.1
Baseband version: G925FXXU2COH2
Kernel version: 3.10.61-5599585
Build number: LMY47X.G925FXXU2COH5
Build date: 20/08/2015
Update file size: 200+ MB

Noticeably, this G925FXXU2COH5 update is also similar to the one released in Europe with build number G920FXXU2COH2 but was just being built lately. As you may take a look a the build details itself, the baseband version and the kernel version is the same to the former. So better check the right now if you haven't received the notification message yet. Below is is the step by step on you can update your Galaxy S6 Edge either via Over-The-Air or by using Smart Switch for PC.

  • A Software update can include but is not limited to:
  • Device stability improvements.
  • Bug fixes.
  • New and / or enhanced features.
  • Further improvements to performance.

How to Update the Galaxy S6 Edge  to Official Android 5.1.1 Lollipop

Just follow these guide on how to keep your Galaxy S6 Edge  in a much safer way while performing a software update.  I also added some useful insights and why you should follow this procedure.
While performing a software update on Galaxy S6  it may only take just a couple of minutes but sometimes it may take longer. It will depend on how small or large the update size is, but most cases it also affects the speed of your data connection. Slower WiFi data connection may take longer while a stronger data connection is more speedy. A 40% to 50% battery power percentage is enough, but a fully recharged is way much better. Since we cannot determine how what the exact time we need to consume when initiating the firmware update so we should make sure our device has still enough battery remaining power to avoid any fatal issues. Have you ever heard or encountered those fellas who ended their devices into soft-bricks? A device was just stuck on Samsung logo or welcome screen and can’t reboot normally, those are what we called soft-bricks. And most probably caused by an inadequate battery power while performing the software update.

Do not forget to back up all of the important data – Even though there are no any data that are going to be deleted right after performing a software update. But what if the software update went wrong, the update unexpectedly fails and then the phone becomes unresponsive and then it forces you to perform a wipe data/factory that basically wipes your phone’s memory storage just to resolve the issue. So you should backup your important files, including contacts, messages, call log, photos, videos, music, and apps. You cannot recover these files if somehow accidentally deleted when the software update goes wrong.

Your Galaxy S6 must still run on the official software version and hasn’t been rooted nor installed with non-official firmware update – Just in case you just need to know that a rooted and a modified Galaxy S6  will not get official software update anymore from Samsung and either to which carrier provider it came from. It will not allow users to install the update as it might harm the device once the update has made. So a rooted and modified Galaxy S6 users usually receives this warning message instead, that says ‘The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.

How to Update the Galaxy S6 Edge via  Over-The-Air (OTA)

This is the usual method on how to check and to perform an update on Galaxy S6 to the latest software version.  This method is what we called Firmware Update  Over-The-Air and so-called as FOTA or simply OTA update. In most often cases, a notification message will be directly sent out to you by your network provider and by Samsung itself, telling you that there is a new update that has now available for download.  This approach requires you to prepare a strong WiFi connection,  and so it might happen sometimes that one did not receive any software update notification messages; 1) if and when the device is out of range during the software update roll out  period, 2) Automatic update has been turned off in the device Settings.
However, We can still manually check for the update instead.
Here’s how to do it manually:
  • From your Galaxy S6 Edge Home screen tap on Apps.
  • Select the Settings gear icon.
  • Tap About device.
  • Tap Software update.
  • Tap Check for an update.

It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Download and Install now if you do so or else Install later if you want to get the update in later time.

But if ever you might have had received this message while checking software update that says something like “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”  This is a warning message that only appears for those devices that have been rooted and installed with modified and unofficial firmware.  So to be able to get the Software OTA update again, you must Unroot your Galaxy S6 first and removed any modification that has been installed on it.

How to Update the Galaxy S6 Edge using Smart Switch

You can use Smart Switch to update your Galaxy S6 software to the latest versions.  It can also be used if the Software Over-The-Air update fails for some reason. The Smart Switch is way similar to the before Samsung Kies that had been used on several devices.

Download Smart Switch for PC

You have to choose the one that is specifically built for computer, depends on of what you have either a PC or Mac.  Once you installed Smart Switch, all you need is to connect your Samsung Galaxy S6 SM-G925F into the computer using the supplied USB data cable.
  1. Run Smart Switch in your computer.
  2. Connect the Galaxy S6  into the computer using the supplied USB data cable.
  3. The Smart Switch will automatically prompt you if the update is available. Just click on the “update” then the “OK”  button to begin updating your Galaxy S6.
    If it doesn’t tell you about an update, you may manually navigate through its settings by doing these procedures below.
  4. Click on the “More” button at the right top of Smart Switch. You will then presented to the options.  Choose “Preferences”  in the drop-down. You are then presented with two tabs the Backup file and  Software Update.  The backup file allows you to allocate a certain folder where you want your  backup files to be stored. Then on the other hand the Software Update tab is where you can set it to the Latest Software Pre-Download Settings.  Just mark the checkbox where it says  Latest Software Pre-Download.
  5. Select the “Backup” button, to safely kept your important data and files such as contacts, messages, call log, videos, music, photos, application and more.  The backup data files will be stored in the  documents folder of your computer. This is a very important steps as it wipes out all of it while performing the software update process. All data will permanently be deleted and it cannot be recovered, so ensure to create a backup first before it’s too late than sorry.
  6. Click on the “More” button again.  Choose “Emergency software recovery and initialization” in the drop-down option.
    Choose the “Software Update and Initialization” tab.
    Wait for a couple of seconds as it check the current software version of your Galaxy S6 and then check for the latest software update version to initialized.  You may then simply follow the on-screen instructions that ask you to click the “OK” or a “Cancel” button.
    Once the Software update initialization started you must not  interrupt the process like unplugging  the data cable connected to the computer nor turning off the device. You must wait until it says “Software update and Initialization are complete”.
    Once your Galaxy S6 reboots disconnect it from the computer. Then reconnect it back again.
  7. Lastly, restore the backup, choose “Restore” button to restore the previously created  backup files.