Sprint Galaxy S6 & S6 Edge Update version [G920PVPS4CPI3,G925PVPS4CPI3], September Security Patches

Sprint is also rolling out the September security patch for their Galaxy S6 and Galaxy S6 edge line-up. The update to which comes as build version G920PVPS4CPI3 for the Galaxy S6 (SM-G920P) and G925PVPS4CPI3 for the Galaxy S6 edge (SM-G925P). The update does not bring any new features to the current Android 6.0.1 Marshmallow as it is just a part of the monthly security maintenance releases. So there is not much more to tell about it as it only applies the new security patch for the month of September. Though it might have include some enhancements and system improvements but it wasn't mentioned in the released keynotes.

Additionally,  you might have noticed that Sprint has released two updates within this month. Actually, the previous released was the August Security Patches while this update is the September Security Patch that has released much earlier than as we expected.

What’s New in Update version G920PVPS4CPI3 and G925PVPS4CPI3?


– September Security Patch


The September security packaged contains Google’s  security patches to address around 66 Android Common Vulnerabilities and Exposures (CVE) and 9 Samsung security patches for Samsung Vulnerabilities and Exposures (SVE), according to Android Security Bulletin.  But then again, there are no exploitation or abuse has been reported of these vulnerabilities.

Technical details:

Sprint Galaxy S6  SM-G920P
  • Android version: 6.0.1 (Marshmallow)
  • Android security patch level: September 1, 2016
  • Baseband version: G920PVPS4CPI3
  • Kernel version: 3.10.61-8847946
  • Build number: MMB29K.G920PVPS4CPI3

Sprint Galaxy S6  SM-G925P
  • Android version: 6.0.1 (Marshmallow)
  • Android security patch level: September 1, 2016
  • Baseband version: G925PVPS4CPI3
  • Kernel version: 3.10.61-8847946
  • Build number: MMB29K.G925PVPS4CPI3

The update is officially live via Over-The-Air (OTA) and it weighs at approximately 50 MB in file size.  The rolling out usually takes into several days, so better check the update manually by going to Settings > About device > Software Update > Check for updates, if you haven’t prompted the availability of the this update yet. You must also ensure that your phone has not been rooted or otherwise the update may fail and you may not successfully get the update.



Previous version:

Sprint Samsung Galaxy S6 SM-G920P
  • Android version: 6.0.1 (Marshmallow)
  • Android security patch level: August 1, 2016
  • Baseband version: G920PVPU3CPG3
  • Kernel version: 3.10.61-7280193
  • Build number: MMB29K.G920PVPU3CPG3

Sprint Samsung Galaxy S6 Edge SM-G925P
  • Android version: 6.0.1 (Marshmallow)
  • Android security patch level: August 1, 2016
  • Baseband version: G925PVPU3CPG3
  • Kernel version: 3.10.61-7280193
  • Build number: MMB29K.G925PVPU3CPG3


How to Update the Galaxy S6 Edge via Over-The-Air (OTA)


This is the usual method on how to check and to perform an update on Galaxy S6 edge  to the latest software version.  This method is what we called Firmware Update  Over-The-Air and so-called as FOTA or simply OTA update. In most often cases, a notification message will be directly sent out to you by your network provider and by Samsung itself, telling you that there is a new update that has now available for download.  This approach requires you to prepare a strong WiFi connection,  and so it might happen sometimes that one did not receive any software update notification messages; (1) If and when the device is out of range during the software update roll out  period, (2) Automatic update has been turned off in the device Settings.
However, We can still manually check for the update instead.

Here’s how to do it manually:
  • From your Galaxy S6 edge Home screen tap on Apps.
  • Select the Settings gear icon.
  • Tap About device.
  • Tap Software update.
  • Tap Check for an update.

It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Install now if you do so or else Install later if you want to get the update in later time.

But if ever you might have had received this message while checking software update that says something like “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”  This is a warning message that only appears for those devices that have been rooted and installed with modified and unofficial firmware.  So to be able to get the Software OTA update again, you must Unroot the Galaxy S6 edge first, and or removed any modification that has been installed in it.

Update the Galaxy S6 edge using Smart Switch for PC


Download Smart Switch for PC

You have to choose the one that is specifically built for computer, depends on what you have either a PC or Mac.  Once you installed Smart Switch, all you need to do is to connect your Samsung Galaxy S6 edge on your  computer using the supplied USB  cable.
  1. Open Smart Switch in your computer.
  2. Connect the Galaxy S6  edge into the computer using the supplied USB data cable.
  3. Smart Switch will automatically prompt you if the update is available. Just click on the “Update” then the “OK”  button to start the update.

[Thanks’ to Mickey]

AT&T Galaxy S6 OTA Update G890AUCU5CPI2, Improved Network Density, Messaging, and September Security Patch

AT&T Galaxy S6 Active (SM-G890A) has just receive an OTA update that bumped up its Android 6.0.1  Marshmallow OS to build version G890AUCU5CPI2 from G890AUCU4CPH3. The update hasn't brought out any new features but it addressed several improvements particularly about the device performance in areas with lower network density and enhancements to Messaging services. The update also applied the latest security patch to which now covers the month of September 2016.

Here are the technical details about the update:

The update includes:
  • Improves device performance in areas with lower network density
  • Performance enhancements to Messaging services
  • Android device security updates

Build version:
  • Android version: 6.0.1
  • Android security patch level : September 1, 2016
  • Baseband version: G890AUCU5CPI2
  • Kernel version: 3.1061.8347181dpi@SWDD6920 #1 Fri Sep 9 15:02:35 KST 2016
  • Build number: MMB29K.G890AUCU5CPI2

This Over-The-Air update weighs at approximately 123 MB i file size to download if your Galaxy S6 Active is currently running with the previous build version G890AUCU4CPH3.  So better check the update right now if you owns the AT&T Galaxy S6 Active.

How to Update the Galaxy S6 Active via Over-The-Air (OTA)


This is the usual method on how to check and to perform an update on Galaxy S6 edge  to the latest software version.  This method is what we called Firmware Update  Over-The-Air and so-called as FOTA or simply OTA update. In most often cases, a notification message will be directly sent out to you by your network provider and by Samsung itself, telling you that there is a new update that has now available for download.  This approach requires you to prepare a strong WiFi connection,  and so it might happen sometimes that one did not receive any software update notification messages; (1) If and when the device is out of range during the software update roll out  period, (2) Automatic update has been turned off in the device Settings.
However, We can still manually check for the update instead.

Here’s how to do it manually:
  • From your Galaxy S6 edge Home screen tap on Apps.
  • Select the Settings gear icon.
  • Tap About device.
  • Tap Software update.
  • Tap Check for an update.

It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Install now if you do so or else Install later if you want to get the update in later time.

But if ever you might have had received this message while checking software update that says something like “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”  This is a warning message that only appears for those devices that have been rooted and installed with modified and unofficial firmware.  So to be able to get the Software OTA update again, you must Unroot the Galaxy S6 edge first, and or removed any modification that has been installed in it.

Update the Galaxy S6 Active using Smart Switch for PC


Download Smart Switch for PC

You have to choose the one that is specifically built for computer, depends on what you have either a PC or Mac.  Once you installed Smart Switch, all you need to do is to connect your Samsung Galaxy S6 on your  computer using the supplied USB  cable.
  1. Open Smart Switch in your computer.
  2. Connect the Galaxy S6  into the computer using the supplied USB data cable.
  3. Smart Switch will automatically prompt you if the update is available. Just click on the “update” then the “OK”  button to begin updating your Galaxy S6.

[Than's to Kelly!]

US Unlocked Galaxy S6 G920TUES5DPI2 September Security Patch Update

The US Unlock Galaxy S6 is getting the new OTA update that brings its Android Marshmallow OS to build version G920TUES5DPI2 from G920TUES4DPH2. The update basically brings the new Android Security Patch to which now covers the month of September fixes. However,  the changelog does not mentioned any additional key features but there might also some minimal system improvements and general bug-fixes along with it. This update is now the 5th Android  6.0.1 Marshmallow released for the Unlock Galaxy S6 in the United States alone.

What's New in Update version G920TUES5DPI2?


- September Security Patch


The September security packaged contains Google's  security patches to address around 66 Android Common Vulnerabilities and Exposures (CVE) and 9 Samsung security patches for Samsung Vulnerabilities and Exposures (SVE), according to Android Security Bulletin.  But then again, there are no exploitation or abuse has been reported of these vulnerabilities.

Technical details:

US Factory Unlocked Samsung Galaxy S6  SM-G920T
  • Android version: 6.0.1 (Marshmallow)
  • Android security patch level: September 1, 2016
  • Baseband version: G920TUES5DPI2
  • Kernel version: 3.10.61-7610624
  • Build number: MMB29K.G920TUES5DPI2


The G920TUES5DPI2 Over-The-Air OTA update weighs at around 50MB in size if your Galaxy S6 runs in previous version G920TUES4DPH2.  While those who prepares Samsung Smart Switch for PC it could be around a hefty 1.8 GB in file size.

Previous version:
  • Android version: 6.0.1 (Marshmallow)
  • Android security patch level: August 1, 2016
  • Baseband version: G920TUES4DPH2
  • Kernel version: 3.10.61-7610624
  • Build number: MMB29K.G920TUES4DPH2

How to Update the Galaxy S6  via Over-The-Air (OTA)

This is the usual method on how to check and to perform an update on Galaxy S6 edge+  to the latest software version.  This method is what we called Firmware Update  Over-The-Air and so-called as FOTA or simply OTA update. In most often cases, a notification message will be directly sent out to you by your network provider and by Samsung itself, telling you that there is a new update that has now available for download.  This approach requires you to prepare a strong WiFi connection,  and so it might happen sometimes that one did not receive any software update notification messages; (1) If and when the device is out of range during the software update roll out  period, (2) Automatic update has been turned off in the device Settings.
However, We can still manually check for the update instead.

Here’s how to do it manually:
  • From your Galaxy S6 edge+ Home screen tap on Apps.
  • Select the Settings gear icon.
  • Tap About device.
  • Tap Software update.
  • Tap Check for an update.

It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Install now if you do so or else Install later if you want to get the update in later time.

But if ever you might have had received this message while checking software update that says something like “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”  This is a warning message that only appears for those devices that have been rooted and installed with modified and unofficial firmware.  So to be able to get the Software OTA update again, you must Unroot the Galaxy S6 edge first, and or removed any modification that has been installed in it.

Update the Galaxy S6 edge+ using Smart Switch for PC


Download Smart Switch for PC

You have to choose the one that is specifically built for computer, depends on what you have either a PC or Mac.  Once you installed Smart Switch, all you need to do is to connect your Samsung Galaxy S6 edge+ on your  computer using the supplied USB  cable.
  1. Open Smart Switch in your computer.
  2. Connect the Galaxy S6  edge+ into the computer using the supplied USB data cable.
  3. Smart Switch will automatically prompt you if the update is available. Just click on the “Update” then the “OK”  button to start the update.

[Thanks' to Sarah]

Sprint Galaxy S6 edge+ Getting September Security Patch Update G928PVPU2BPH9

Sprint Galaxy S6 edge+ is getting the September security patch update. The update came out as build version G928PVPU2BPH9, that carries the said security maintenance release for this month. The September security packaged contains about 66 Google security patches to address the Common Vulnerabilities and Exposures (CVE) and 9 Samsung security patches for Samsung Vulnerabilities and Exposures (SVE), according to Android Security Bulletin for Samsung Mobile devices.  But then again, there are no exploitation or abuse has been reported of these vulnerabilities.

So those who owns the Sprint Galaxy S6 edge+ (SM-G928P), you folks might check the update right now.

Sprint Samsung Galaxy S6 Edge
  • Model number: SM-G928P
  • Android version: 6.0.1 (Marshmallow)
  • Android security patch level: September 1, 2016
  • Baseband version: G928PVPU2BPH9
  • Kernel version: 3.10.61
  • Build number: MMB29K.G928PVPU2BPH9

Changelog details:


    • Android Security Patches


    So those who did not received the update’s notification message yet, you folks might better check the update manually either via Over-The Air update and or thru Samsung Smart Switch for PC.

    How to Update the S6 edge+ via Over-The-Air (OTA)

    This is the usual method on how to check and to perform an update on Galaxy S6 edge+  to the latest software version.  This method is what we called Firmware Update  Over-The-Air and so-called as FOTA or simply OTA update. In most often cases, a notification message will be directly sent out to you by your network provider and by Samsung itself, telling you that there is a new update that has now available for download.  This approach requires you to prepare a strong WiFi connection,  and so it might happen sometimes that one did not receive any software update notification messages; (1) If and when the device is out of range during the software update roll out  period, (2) Automatic update has been turned off in the device Settings. However, We can still manually check for the update instead. Here’s how to do it manually:
    • From your Galaxy S6 edge+ Home screen tap on Apps.
    • Select the Settings gear icon.
    • Tap About device.
    • Tap Software update.
    • Tap Check for an update.
    It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Install now if you do so or else Install later if you want to get the update in later time. But if ever you might have had received this message while checking software update that says something like “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”  This is a warning message that only appears for those devices that have been rooted and installed with modified and unofficial firmware.  So to be able to get the Software OTA update again, you must Unroot the Galaxy S6 edge first, and or removed any modification that has been installed in it.

    Update the Galaxy S6 edge+ using Smart Switch for PC

    Download Smart Switch for PC You have to choose the one that is specifically built for computer, depends on what you have either a PC or Mac.  Once you installed Smart Switch, all you need to do is to connect your Samsung Galaxy S6 edge+ on your  computer using the supplied USB  cable.
    1. Open Smart Switch in your computer.
    2. Connect the Galaxy S6  edge+ into the computer using the supplied USB data cable.
    3. Smart Switch will automatically prompt you if the update is available. Just click on the “Update” then the “OK”  button to start the update.
    Sprint Galaxy S6 Edge+ support page

    T-Mobile Galaxy S6 Edge+ Getting September Security Patch Update G928TUVS4DPH2

    T-Mobile Galaxy S6 edge+ (SM-G928T)  is getting the Android security patch for that covers the September fixes. This is the earliest September Security Patch update we've got so far among all of the rest the Galaxy S6, Galaxy S6 edge, and S6 edge+ variants not only in the United States but all over the world.  Noting that T-Mobile Galaxy S6 edge+ skipped the August Security patch update last month, so this security maintenance release covers both August and September patches.

    The Over-The-Air OTA update came out as build version G928TUVS4DPH2 and weighs at only 77 MB in size.

    Technical Details: Android 6.0.1 Marshmallow Update Firmware build G928TUVS4DPH2


    • Device: Samsung Galaxy S6 Edge+
    • Model number: SM-G928T
    • Android version: 6.0.1 (Marshmallow)
    • Android security patch level: September 1, 2016
    • Baseband version: G928TUVS4DPH2
    • Kernel version: 3.10.61-8479853
    • Build number: MMB29K.G928TUVS4DPH2
    • AP: G928TUVS4DPH2
    • CSC: G925TTMB4DPH2
    • CP: G928TUVS4DPH2

    Main Improvements:
    • August and September security maintenance release


    So those who did not received the update’s notification message yet, you folks might better check the update manually either via Over-The Air update and or thru Samsung Smart Switch for PC.

    How to Update the S6 edge+ via Over-The-Air (OTA)


    This is the usual method on how to check and to perform an update on Galaxy S6 edge+  to the latest software version.  This method is what we called Firmware Update  Over-The-Air and so-called as FOTA or simply OTA update. In most often cases, a notification message will be directly sent out to you by your network provider and by Samsung itself, telling you that there is a new update that has now available for download.  This approach requires you to prepare a strong WiFi connection,  and so it might happen sometimes that one did not receive any software update notification messages; (1) If and when the device is out of range during the software update roll out  period, (2) Automatic update has been turned off in the device Settings.
    However, We can still manually check for the update instead.

    Here’s how to do it manually:
    • From your Galaxy S6 edge+ Home screen tap on Apps.
    • Select the Settings gear icon.
    • Tap About device.
    • Tap Software update.
    • Tap Check for an update.

    It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Install now if you do so or else Install later if you want to get the update in later time.

    But if ever you might have had received this message while checking software update that says something like “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”  This is a warning message that only appears for those devices that have been rooted and installed with modified and unofficial firmware.  So to be able to get the Software OTA update again, you must Unroot the Galaxy S6 edge first, and or removed any modification that has been installed in it.

    Update the Galaxy S6 edge+ using Smart Switch for PC


    Download Smart Switch for PC

    You have to choose the one that is specifically built for computer, depends on what you have either a PC or Mac.  Once you installed Smart Switch, all you need to do is to connect your Samsung Galaxy S6 edge+ on your  computer using the supplied USB  cable.
    1. Open Smart Switch in your computer.
    2. Connect the Galaxy S6  edge+ into the computer using the supplied USB data cable.
    3. Smart Switch will automatically prompt you if the update is available. Just click on the “update” then the “OK”  button to begin updating your Galaxy S6 edge+ .

    Sprint Galaxy S6 and S6 edge Gets Battery Improvements and New Security Patch September Update

    If you're a Sprint Galaxy S6 and S6 edge users, you may already or should received an update today. Sprint has rolled out an update
    to these device which bumps up to build version G920PVPU3CPG3 (for Galaxy S6) and G925PVPU3CPG3 (for the Galaxy S6 edge. It's only a minor OTA update but is says it improves the battery life performance and the new security update for this month.

    Here are are firmware build details to which can be viewed in the device Settings > About Device.

    Sprint Samsung Galaxy S6 SM-G920P
    • Android version: 6.0.1 (Marshmallow)
    • Android security patch level: August 1, 2016
    • Baseband version: G920PVPU3CPG3
    • Kernel version: 3.10.61-7280193
    • Build number: MMB29K.G920PVPU3CPG3

    Sprint Samsung Galaxy S6 Edge SM-G925P
    • Android version: 6.0.1 (Marshmallow)
    • Android security patch level: August 1, 2016
    • Baseband version: G925PVPU3CPG3
    • Kernel version: 3.10.61-7280193
    • Build number: MMB29K.G925PVPU3CPG3

    Main Features:
    • Improved Battery life performance
    • Android Security Updates
    • Bug Fixes

    However, the Galaxy S6 Edge+ (SM-G928P) users might also get the same treatment these couple of days.

    The update is officially live via Over-The-Air (OTA) and it weighs at approximately 50  MB in file size.  The rolling out usually takes into several days, so better check the update manually by going to Settings > About device > Software Update > Check for updates, if you haven’t prompted the availability of the this update yet. You must also ensure that your phone has not been rooted or otherwise the update may fail and you may not successfully get the update.

    source: Sprint S6, S6 Edge

    Galaxy S6, S6 Edge and S6 Edge+ August Security Patch Update Roundup

    The Galaxy S6, S6 edge, and S6 edge plus is now awaiting for the upcoming Android 7.0 Nougat updates that will sooner arrive. Samsung have never been missed-out to released the monthly security updates for the said devices. Whilst September is already here, and so does the Android Security Patch Update for the month of August  have had been rolled out on various Galaxy S6, S6 Edge, and S6 edge+ devices across the globe since last week.

    Those who might been looking for the build version of these updates, you folks might check the following details below if your device already receive it in the first place.

    United States Galaxy S6, S6 edge Updates


    Updated - September 20, 2016 - AT&T Galaxy S6, and S6 Edge added!

    AT&T Galaxy S6, and S6 Edge
     Galaxy S6 SM-G920A Galaxy S6 edge SM-G925A

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920AUCS5DPI1
    • Kernel version: 3.10.61-8851614
    • Build number: MMB29K.G920AUCS5DPI1

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925AUCS5DPI1
    • Kernel version: 3.10.61-8851614
    • Build number: MMB29K.G925AUCS5DPI1


    U.S. Samsung Galaxy S6 Factory Unlocked version









     Galaxy S6 SM-G920T

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920TUES4EPH2
    • Kernel version: 3.10.61-7610624
    • Build number: MMB29K.G920TUES4DPH2

    Sprint Galaxy S6, and S6 Edge
     Galaxy S6 SM-G920P Galaxy S6 edge SM-G925P

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920PVPU3CPG3
    • Kernel version: 3.10.61-8273934
    • Build number: MMB29K.G920PVPU3CPG3


    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925PVPU3CPG3
    • Kernel version: 3.10.61-8273934
    • Build number: MMB29K.G925PVPU3CPG3

    T-Mobile Galaxy S6, and S6 Edge
     Galaxy S6 SM-G920T Galaxy S6 edge SM-G925T

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920TUVS4EPH2
    • Kernel version: 3.10.61-8273934
    • Build number: MMB29K.G920TUVS4EPH2

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925TUVS4EPH2
    • Kernel version: 3.10.61-8273934
    • Build number: MMB29K.G925TUVS4EPH2

    Verizon Galaxy S6, and S6 Edge
     Galaxy S6 SM-G920V Galaxy S6 edge SM-G925V

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920VVRU4CPH1
    • Kernel version: 3.10.61-8352520
    • Build number: MMB29K.G920VVRU4CPH1

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925VVRU4CPH1
    • Kernel version: 3.10.61-8352520
    • Build number: MMB29K.G925VVRU4CPH1
    Metro PCS Galaxy S6

     Galaxy S6 SM-G920T1

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920T1UVS4EPH3
    • Kernel version: 3.10.61-7610624
    • Build number: MMB29K.G920T1UVS4EPH3



    International Galaxy S6 and S6 edge

    Europe Update:

    Galaxy S6 SM-G920F Galaxy S6 edge SM-G925F

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920FXXU4DPGW
    • Kernel version: 3.10.61-8821257
    • Build number: MMB29K.G920FXXU4DPGW

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925FXXU4DPGW
    • Kernel version: 3.10.61-8821257
    • Build number: MMB29K.G925FXXU4DPGW

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920FXXU4DPHF
    • Kernel version: 3.10.61-8273934
    • Build number: MMB29K.G920FXXU4DPHF

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925FXXU4DPHF
    • Kernel version: 3.10.61-8273934
    • Build number: MMB29K.G925FXXU4DPHF

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920FXXU4DPFY
    • Kernel version: 3.10.61-8826787
    • Build number: MMB29K.G920FXXU4DPH7

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925FXXU4DPFY
    • Kernel version: 3.10.61-8826787
    • Build number: MMB29K.G925FXXU4DPH7


    Europe's Carrier Updates:
    Galaxy S6 SM-G920F Galaxy S6 edge SM-G925FCarrier

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920FXXU4DPG2
    • Kernel version: 3.10.61-8734643
    • Build number: MMB29K.G920FXXU4DPHB

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925FXXU4DPG2
    • Kernel version: 3.10.61-8734643
    • Build number: MMB29K.G925FXXU4DPHB
    Vodafone, Si.Mobil, A1, Vipnet,

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920FXXU4DPG4
    • Kernel version: 3.10.61-8898748
    • Build number: MMB29K.G920FXXU4DPHA


    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925FXXU4DPG4
    • Kernel version: 3.10.61-8898748
    • Build number: MMB29K.G925FXXU4DPHA
    3

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920FXXU4DPG4
    • Kernel version: 3.10.61-8125258
    • Build number: MMB29K.G920FXXU4DPH9

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925FXXU4DPG4
    • Kernel version: 3.10.61-8125258
    • Build number: MMB29K.G925FXXU4DPH9
    Play

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920FXXU4DPGW
    • Kernel version: 3.10.61-8273934
    • Build number: MMB29K.G920FXXU4DPH2

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925FXXU4DPGW
    • Kernel version: 3.10.61-8273934
    • Build number: MMB29K.G925FXXU4DPH2
    O2, T-Mobile

    Africa, and Middle East Galaxy S6, and S6 Edge Update
     Galaxy S6 SM-G920F Galaxy S6 edge SM-G925F

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920FXXS4DPG3
    • Kernel version: 3.10.61-7169835
    • Build number: MMB29K.G920FXXS4DPH8

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925FXXS4DPG3
    • Kernel version: 3.10.61-7169835
    • Build number: MMB29K.G925FXXS4DPH8

    Southeast Asia Galaxy S6, S6 edge update
    Galaxy S6 SM-G920F Galaxy S6 edge SM-G925F

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920FXXU3DPFV
    • Kernel version: 3.10.61-8326249
    • Build number: MMB29K.G920FXXS4DPHI

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925FXXU4DPGH
    • Kernel version: 3.10.61-8326249
    • Build number: MMB29K.G925FXXS4DPHI

    Galaxy S6 SM-G920I and S6 Edge SM-G925I Updates


    Australia:
    Galaxy S6 SM-G920I Galaxy S6 edge SM-G925I

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920IDVU3EPGE
    • Kernel version: 3.10.61-8829014
    • Build number: MMB29K.G920IDVU3EPGG


    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925IDVU3EPGE
    • Kernel version: 3.10.61-8829014
    • Build number: MMB29K.G925IDVU3EPGG


    Latin America:
    Galaxy S6 SM-G920I Galaxy S6 edge SM-G925I

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920IDVU3EPH3
    • Kernel version: 3.10.61-8980404
    • Build number: MMB29K.G920IDVU3EPH9


    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925IDVU3EPH3
    • Kernel version: 3.10.61-8980404
    • Build number: MMB29K.G925IDVU3EPH9


    Middle East:
    Galaxy S6 SM-G920I Galaxy S6 edge SM-G925I

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920IDVU3EPF3
    • Kernel version: 3.10.61-8324534
    • Build number: MMB29K.G920IDVS3EPH3


    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925IDVU3EPF3
    • Kernel version: 3.10.61-8324534
    • Build number: MMB29K.G925IDVS3EPH3


    Asia:
    Galaxy S6 SM-G920I Galaxy S6 edge SM-G925I

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G920IDVU3EPG1
    • Kernel version: 3.10.61-7315840
    • Build number: MMB29K.G920IDVS3EPH2


    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G925IDVU3EPG1
    • Kernel version: 3.10.61-7315840
    • Build number: MMB29K.G925IDVS3EPH2


    Below are the updates for the Galaxy S6 Edge+ to which got some several movements on some countries that have missed the previous security updates in July. So some of these released, may already includes the July 'til August security patches.

    Galaxy S6 edge+ SM-G928F Updates

     Galaxy S6 SM-G928T  Country/Network

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G928FXXU2BPG3
    • Kernel version: 3.10.61-7980311
    • Build number: MMB29K.G928FXXU2BPH5

     O2

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G928FXXU2BPE6
    • Kernel version: 3.10.61-7980311
    • Build number: MMB29K.G928FXXS2BPH3

     Switzerland, Luxembourg (unlocked version)

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G928FXXU2BPF1
    • Kernel version: 3.10.61-7080791
    • Build number: MMB29K.G928FXXS2BPH2

    Vodafone Europe, Nordic Countries

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G928FXXU2BPE6
    • Kernel version: 3.10.61-7980311
    • Build number: MMB29K.G928FXXS2BPH1

    Released to majority of Europe's Unlocked Galaxy S6 edge+

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G928FXXU2BPE6
    • Kernel version: 3.10.61-7980311
    • Build number: MMB29K.G928FXXU2BPG4

    Exclusive release to EE Galaxy S6 edge+ in UK.

    Australia's Galaxy S6 edge+ SM-G928I Update


    Australia's Galaxy S6 edge+ have missed the security update in June and July, but surprisingly the new update came around for the month of August instead, to which already includes the previous months fixes.

     Unlocked/SIM-Free version Telstra

    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G928IDVU2BPG3
    • Kernel version: 3.10.61-8848699
    • Build number: MMB29K.G928IDVU2BPG3


    • Android version: Android 6.0.1
    • Android security patch level: August 1, 2016
    • Baseband version: G928IDVU2BPE2
    • Kernel version: 3.10.61-7417499
    • Build number: MMB29K.G928IDVS2BPH1


    Well, there you have it folks! Just let us know if you haven't receive the said update above on your Galaxy S6, S6 edge, and S6 edge+ .