Europe Galaxy S6 edge May 2018 Update version G925FXXU6ERC9

Update for factory unlocked Galaxy S6 edge SM-G925F release version G925FXXU6ERC9. This version brings the 2018 March 1st Security updates, including minor bug-fixes and Android system improvements.
  • Device/Model name: Galaxy S6 edge SM-G925F
  • Android version: 7.0 (Nougat)
  • Android security patch level: 1 March 2018
  • Baseband version: G925FXXU6ERC9
  • Kernel version: 3.10.61-13115714
  • Build number: NRD90M.G925FXXU6ERC9






Tips: You may always use the most latest firmware update as it includes but not limited to new or enhanced apps and features, device security enhancements. It may also includes some improvements to data connectivity, audio and screen display quality, camera, and other system enhancements.

Stock G925FXXU6ERC9 Firmware
United Kingdom (Factory unlocked default)BTU - (Link)

Check the Most Latest Firmware Updates Here: Galaxy S6 edge SM-G925F Android 7.0 Nougat Firmware

How to Use the Stock Firmware?


Stock firmware can only be use to restore the Galaxy S6 edge to its original Android operating system images if it has been modified in unauthorized way and it will no longer receives an OTA updates.

FOLLOW THIS GUIDE: Install Galaxy S6, S6 edge, and S6 edge+ Factory Stock Firmware

Instructions:


Tools You’ll Need:
– Odin3_v3.12.10
–  USB driver or grab Smart Switch
  1. Backup all important data stored in the phone’s memory, including contacts, messages, music, videos, and etc.
  2. Extract or unzip the firmware file you have downloaded so that you’ll get the  “Odin flashable” tarball  firmware  file.
  3. Make sure the battery is re-charge or it has at-least around 50% remaining power.
  4. Enable the USB debugging mode. Go to Settings > About device > then look for the Build number > tap it for around 7-times until says something like “Congratulations you are now a developer” .  head bacl to the home screen to activate the USB debugging mode. From Home screen > Settings > Developer option, then mark check the box that says USB Debugging Mode.
  5. Turn off the “Reactivation Lock”.  Some other Galaxy S6 variant this feature are pre-installed.  To turn it Off just go to Settings > Security > Reactivation Lock and then unmark check the Reactivation lock option. You may need to enter your password on this process.
  6. Use the supplied USB data cable of your Galaxy S6 edge.
  7. Use Windows PC to this process as this will not work on MAC computers.

Procedures:


  1.  Run Odin on your PC.
  2. Reboot the Galaxy S6 edge into Odin download mode.
    Turn it off, once completely shut down  hold down the ‘HOME’ + ‘VOLUME DOWN’ buttons and press the ‘POWER’ button for about 2 seconds until a WARNING! Screen appears. Press the ‘VOLUME UP’ button to continue or enter Download Mode.
  3. Connect the phone to PC via USB. Then make sure you can see as phone “Added” in Odin log box or highlight the COM:ID once the computer recognizes the device.
  4. In Odin window, Do Not ever tick ‘RE-Partition’ , just leave the ‘Auto Reboot’ and ‘F. Reset Time’ mark as checked.
  5. Load the firmware packages, simply tick Odin’s AP button then locate and select the firmware tarball:
    – G925FXXU6ERC9_G925FBTU6ERC3_Home.tar
  6. Click on the “Start” button to flash the stock firmware
  7. Wait until the flashing successfully finishes, you’ll just see a word ‘PASS’ in Odin.
Edit