G920TUVS3DOJC: T-Mobile Galaxy S6 SM-G920T Android 5.1.1 Firmware

Official firmware build G920TUVS3DOJC, Android 5.1.1 (Lollipop) for T-Mobile Galaxy S6 (SM-G920T). This build is officially rolled out on December 14, 2015 to which an update to the previous released build G920TUVU3DOJ7. This firmware build mainly brings the following features and or improvements for the device:
  • Android OS Security updates

Firmware version: G920TUVS3DOJC

This details can be viewed in the device settings, from the Home screen, tap on Apps > Settings > About Device:
  • Device name:  Galaxy S6 (T-Mobile USA)
  • Model number: SM-G920T
  • Android version: 5.1.1
  • Baseband version: G920TUVS3DOJC
  • Kernel Version: 3.10.61-5756057
  • Build Number: LMY47X.G925TUVS3DOJC
  • AP:  G920TUVS3DOJC
  • CP:  G920TUVS3DOJ7
  • Build date: November 30, 2015
  • Date released: December 14, 2015
  • Stock Firmware: (Link)

Important note:  Always flash or install the latest stock firmware. Do not use this firmware package for downgrading purposes as it may not work, and or else otherwise your device OS will still be prone to an Android OS vulnerabilities.

How to Use the T-Mobile Galaxy S6 (SM-G920T) Stock Firmware

  • Unroot T-Mobile Galaxy S6 SM-G920T – To remove root if the device has been rooted and unable to get the recent OTA update.
  • Unbrick T-Mobile Galaxy S6 SM-G920T –  To fix soft-bricked Galaxy S6 if one have messed-up from customization like rooting, custom ROMs, modified kernels and other system images.  The stock firmware can resolve issues such as  boot loops and stuck at Samsung logo animated screen.
  • Restore T-Mobile Galaxy S6 SM-G920T to stock official firmware – If the device runs in any modified and non-T-Mobile firmware. Suitable for restoring the device to is original factory default settings.
  • Upgrade T-Mobile Galaxy S6 SM-G920T – If one had missed the latest version of stock Android OS.  Manually install the newest update if the device is modified as and it is unsupported.  There are times an unwanted error message occurs when updating via Over-The-Air (OTA) update.

For removing root and restoring back the T-Mobile Galaxy S6 SM-G920T to the official from any custom firmware; just grab the right stock firmware build package accordingly that also matches and signifies your country and network provider. Once the appropriate stock firmware is installed to the device, it will then be able to get latest software update again via Over-The-Air OTA update anytime soon.

How To Flash Stock Firmware on Galaxy S6?

  • Backup all stored data in the device.  Though the process will not eventually delete the stored data but we are about to touch the inner system of the phone which is crucial on some part.  If anything might go wrong and it forces you to perform a full wipe factory reset your data will be wiped out. So to make all important data safe, don’t be lazy to make a backup in the first place.
  • Recharge your device battery –  A sudden power interruption will cause an undesired outcome.
  • Enable USB debugging mode – From Home screen, tap Apps > Settings > Developer option. Then mark USB Debugging checkbox.
  • Turn off the “Reactivation Lock” . Some other Galaxy S6 version this feature is pre-installed.  To turn it Off just go to Settings > Security > Reactivation Lock and then unmark check the Reactivation lock option. You may need to enter your password on this process.
  • Use the supplied USB data cable of your Galaxy S6 edge.
  • Use Windows PC to this process as this will not work on MAC computers.
  • Extract the firmware file after downloaded so that you’ll get the  “Odin flashable” tarball stock firmware  file.
  • Grab Odin3_v3.10.6 and the latest USB.
    Download Odin3_v3.10.6


  1. Run Odin on your PC desktop
  2. Boot the Galaxy S3 into Odin download mode.
    Turn it off, once completely shut down  hold down the ‘HOME’ + ‘VOLUME DOWN’ buttons and press the ‘POWER’ button for about 2 seconds until a WARNING! Screen appears. Press the ‘VOLUME UP’ button to continue or enter Download Mode.
  3. Connect the phone to PC via USB. Then make sure you can see as phone “Added” in Odin log box or highlight the COM: ID once the device is recognized on PC.
  4. In Odin window, Do Not ever tick ‘Re-Partition’, just leave the ‘Auto Reboot’ and ‘F. Reset Time’ mark as checked.
  5. Click on Odin’s AP button then browse and load the tarball file.
    e.g. T-Mobile Galaxy SM-G920T:

6. Click on “Start” to flash the stock firmware
7. Wait until the flashing successfully finishes, you’ll just see a word ‘PASS’ in Odin.


1. Odin “Fail!” instead of getting Pass!Check everything from the USB driver to the USB data cable. Sometimes you need to repeat this process one more time if you get fail as it depends on how your Galaxy S6 came as being rooted and modified.

2:  Ended up into  bootloop and stuck on welcome screen logo.You may  necessarily perform the Full Wipe/Factory Data Reset on your Galaxy S6. This oftentimes happens if your Galaxy S6 Edge has loads of modified system images.
  • Turn off the phone and set it into recovery mode.
  • Press and hold Volume up, home and power buttons.
  • Once in recovery mode, perform full wipe
  • Select ‘wipe data/factory reset’
  • Lastly select ‘reboot system’ now and wait ’til your phone completely reboot in normal mode.