G925FXXS5DQC1 Android 6.0 Marshmallow S6 edge SM-G925F Firmware

Download Galaxy S6 edge SM-G925F Official Android 6.0.1 Marshmallow firmware version G925FXXS5DQC1. This firmware version includes the Android security patch level of March 1, 2017, along with several bug-fixes and general system improvements.
Device nameGalaxy S6 edge
Model numberSM-G925F
Android version6.0.1 (Marshmallow)
Android security patch level1 March 2017
Baseband versionG925FXXU5DPL3
Kernel version3.10.61-8821257
Build numberMMB29K.G925FXXS5DQC1
Build date9 March 2017

TIPS: You may always use the latest firmware updates as it includes bunch of new features and improvements for the device.
Get the new firmware version: Galaxy S6 edge SM-G925F Android 7.0 Nougat Firmware

Country/RegionFirmware build downloads
United KingdomBTU_G925FXXS5DQC1 [link]
UK (EE)EVR_G925FXXS5DQC1 [link]
ItalyITV_G925FXXS5DQC1 [link]
Luxembourg/BelgiumLUX_G925FXXS5DQC1 [link]

Check the Most Latest Firmware Updates Here: Galaxy S6 edge Stock Firmware

FOLLOW THIS GUIDE: Install Galaxy S6, S6 edge, and S6 edge+ Factory Stock Firmware


Tools You’ll Need: You may grab the newest version or try the older ones that works on your PC.

Odin3 FlasherUSB-Driver
 Odin3_v3.10.7 v1.5.45

  1. Backup all important data stored in the phone’s memory, including contacts, messages, music, videos, and etc.
  2. Extract or unzip the firmware file you have downloaded so that you’ll get the  “Odin flashable” tarball  firmware  file.
  3. Make sure the battery is re-charge or it has at-least around 50% remaining power.
  4. Enable the USB debugging mode. Go to Settings > About device > then look for the Build number > tap it for around 7-times until says something like “Congratulations you are now a developer” .  head bacl to the home screen to activate the USB debugging mode. From Home screen > Settings > Developer option, then mark check the box that says USB Debugging Mode.
  5. Turn off the “Reactivation Lock”.  Some other Galaxy S6 variant this feature are pre-installed.  To turn it Off just go to Settings > Security > Reactivation Lock and then unmark check the Reactivation lock option. You may need to enter your password on this process.
  6. Use the supplied USB data cable of your Galaxy S6 edge.
  7. Use Windows PC to this process as this will not work on MAC computers.


  1.  Run Odin on your PC.
  2. Reboot the Galaxy S6 edge into Odin download mode.
    Turn it off, once completely shut down  hold down the ‘HOME’ + ‘VOLUME DOWN’ buttons and press the ‘POWER’ button for about 2 seconds until a WARNING! Screen appears. Press the ‘VOLUME UP’ button to continue or enter Download Mode.
  3. Connect the phone to PC via USB. Then make sure you can see as phone “Added” in Odin log box or highlight the COM:ID once the computer recognizes the device.
  4. In Odin window, Do Not ever tick ‘RE-Partition’ , just leave the ‘Auto Reboot’ and ‘F. Reset Time’ mark as checked.
  5. Load the firmware packages in Odin’s designated buttons:
     AP_G925FXXS5DQC1_ user_ low_ship.tar
    – BL_G925FXXS5DQC1_ user_ low_ship.tar
    – CP_G925FXXU5DPL3_ user_low_ship.tar
    – CSC_G925FBTU5DQA2_ user_low_ship.tar
  6. Click on the “Start” button to flash the stock firmware
  7. Wait until the flashing successfully finishes, you’ll just see a word ‘PASS’ in Odin.

Perform Factory Data Reset

To obtain a much fluid and fresher firmware, you may  necessarily perform the Full Wipe/Factory Data Reset on your Galaxy S6. This will get rid of any lag issues especially if your Galaxy S6 has been rooted and it has loads of modified system images before.
1. Turn off the phone and set it into recovery mode.
2. Press and hold Volume Up, Home and Power buttons.
3. Once in recovery mode, perform the full wipe option.  Just select ‘Wipe Data/Factory Reset’. Use the Volume buttons to select and then the Power button to execute the selection.
4. Lastly select ‘Reboot System  Now”  and wait until the phone completely reboot.