G925FXXU5EQCS Europe Galaxy S6 edge SM-G925F Android 7.0 Nougat Firmware

Download Galaxy S6 edge SM-G925F Official Android 7.0 Nougat  firmware version G925FXXU5EQCS. The G925FXXU5EQCS is an unbranded stock build and were officially released in select European countries.  Alongside with the Android Nougat goodies, this version also includes several bug-fixes, general system improvements, and the 1 April 2017 Android security patch level.

Device nameGalaxy S6 edge
Model numberSM-G925F
Android version7.0 (Nougat)
Android security patch level1 April 2017
Baseband versionG925FXXU5EQCS
Kernel version3.10.61-10531122
Build numberNRD90M.G925FXXU5EQCS
APG925FXXU5EQCS
CPG925FXXU5EQCS
CSCG925FOXA5EQCS
Build dateThu 30 Mar 2017






Download G925FXXU5EQCS Android 7.0 Nougat firmware


TIPS: Always use the newest and the latest firmware update for your device.
Get the new firmware version: Galaxy S6 edge SM-G925F Android 7.0 Nougat Firmware

CountryFirmware downloads
Southeast EuropeSEE_G925FXXU5EQCS
Baltic StatesSEB_G925FXXU5EQCS
Russian FederationSER_G925FXXU5EQCS
UkraineSEK_G925FXXU5EQCS
Macedonia FYROMVIM_G925FXXU5EQCS
CroatiaTWO_G925FXXU5EQCS

The stock firmware can only be use to remove root and any modified system images and then restores back the device to its original Android OS.
Read our Guides: How to Safely Unroot the Galaxy S6 edge

Prerequisites:


Download:  Odin3_v3.11, including the USB Driver.
  • Extract or unzip the firmware file you have downloaded so that you’ll get the  “Odin flashable” tarball  firmware  file.
  • Make sure the battery is re-charge or at-least it’s still got around 60% remaining power.
  • Enable the USB debugging mode. Go to Settings > About device > then look for the Build number > tap it for around 7-times until says something like “Congratulations you are now a developer” .  head bacl to the home screen to activate the USB debugging mode. From Home screen > Settings > Developer option, then mark check the box that says USB Debugging Mode.
  • Turn off the “Reactivation Lock”.  Some other Galaxy S6 variant this feature are pre-installed.  To turn it Off just go to Settings > Security > Reactivation Lock and then unmark check the Reactivation lock option. You may need to enter your password on this process.
  • Use the supplied USB data cable of your Galaxy S6 edge.
  • Use Windows PC to this process as this will not work on MAC computers.

Instructions:


  1.  Run Odin on your PC desktop
  2. Boot the Galaxy S6 into Odin download mode.
    Turn it off, once completely shut down  hold down the ‘HOME’ + ‘VOLUME DOWN’ buttons and press the ‘POWER’ button for about 2 seconds until a WARNING! Screen appears. Press the ‘VOLUME UP’ button to continue or enter Download Mode.
  3. Connect the phone to PC via USB. Then make sure you can see as phone “Added” in Odin log box or highlight the COM:ID once the device is detected,
  4. In Odin window, Do Not ever tick ‘RE-Partition’ , just leave the ‘Auto Reboot’ and ‘F. Reset Time’ mark as checked.
  5. Click on Odin’s AP button then browse and load the tarball file.
    G925FXXU5EQCS_G925FOXA5EQCS_Home.tar.md5″
  6. Click on “Start” to flash the stock firmware
  7. Wait until the flashing successfully finishes, you’ll just see a word ‘PASS’ in Odin.

Troubleshooting:


1. Odin says Fail! instead of getting Pass!Check everything from the USB driver to the USB data cable. Sometimes you need to repeat this process one more time if you get fail as it depends on how your Galaxy S6 came as being rooted and modified.

2:  Perform Factory Data Reset.To obtain a much fluid and fresher firmware, you may  necessarily perform the Full Wipe/Factory Data Reset on your Galaxy S6. This will get rid of any lag issues especially if your Galaxy S6 has been rooted and it has loads of modified system images before.
  • Turn off the phone and set it into recovery mode.
  • Press and hold Volume Up, Home and Power buttons.
  • Once in recovery mode, perform full wipe
    Select ‘Wipe Data/Factory Reset’
  • Lastly select ‘Reboot System  Now”  and wait until the phone completely reboot.
Edit