G925VVRS4DQE1 - Verizon Galaxy S6 edge SM-G925V Android 7.0 Nougat Stock Firmware

Verizon Galaxy S6 edge SM-G925V Android 7.0 Nougat stock firmware release build G925VVRS4DQE1. This version is the 2nd official Android 7.0 Nougat update landed to the latter, replacing the earlier released build G925VVRS4DQD1. This build includes several improvements to optimize the device performance, resolve known issues, and brings the May 2017 Android security patches.

DeviceGalaxy S6 edge SM-G925V
Android version7.0 (Nougat)
Android security patch levelMay 1, 2017
Baseband versionG925VVRS4DQE1
Kernel version3.10.61
Build numberNRD90M.G925VVRS4DQE1
Release dateApril 24, 2017
Stock firmwareVZW_G925VVRS4DQE1

Tips: You may always use the most latest firmware update as it includes but not limited to new or enhanced apps and features, device security enhancements. It may also includes some improvements to data connectivity, audio and screen display quality, camera, and other system enhancements.

Check the Most Latest Firmware Updates Here: Galaxy S6 edge Stock Firmware

How to Use the Stock Firmware?

This Stock firmware can only be use on  Verizon Galaxy S6 edge SM-G925V only. It can be use to manually upgrade the device, including fixing soft-bricks such bootloops, stuck on Samsung logo. The stock firmware can restore the phone to its original Android operating system if it has been modified in unauthorized way and if the device cannot take nor receives an OTA software updates.

FOLLOW THIS GUIDE: Install Galaxy S6, S6 edge, and S6 edge+ Factory Stock Firmware

1. Backup all important data stored in the device memory, including contacts, messages, photos, videos, music, and other files.
2. Recharge the phone or it should still have at-least around 50% remaining power.
3. Grab these tools:
– Odin3_v3.12.3 (Nougat)
– USB driver or grab Smart Switch
4. Extract the firmware package in your PC.
5. Open or run Odin3 in your computer.
6. Reboot the Galaxy S6 in Download mode. Turn Off the phone then press and hold down the Volume Down+Power+Home keys at the same time. You may then press the Volume Up key to continue.
7. Connect the phone to PC.
8. Load the stock firmware:
a. Single tarball – Click on AP button and load the stock firmware tarball.
b. Multiple tarball – Load each individual stock firmware tarball such as BootloaderAPCP, and CSC on Odin3’s designated slots.
9. Click the “Start” button to begin the installation.
10. Wait until the flashing completely finishes and the phone reboot itself.

You may also perform a full factory data reset to regain a cleaner and fresher firmware installation. Just ensure that you already made a backup all of your important data stored in the phone.