G928VVRU3CQB9 Android 7.0 Nougat S6 edge+ SM-G928V Firmware

Download G928VVRU3CQB9 Official Android 7.0 Nougat Firmware for Galaxy S6 edge+ SM-G928V.

DeviceGalaxy S6 edge+ SM-G928V
Android version7.0 (Nougat)
Android security patch levelMarch 1, 2017
Baseband versionG928VVRU3CQB9
Kernel version3.10.61
Build numberNRD90M.G928VVRU3CQB9
Release dateApril 12, 2017
ChangesAndroid Nougat Upgrade

Download G928VVRU3CQB9 Stock firmware

TIPS:  You may only use the most latest firmware update for your device.
Check for new firmware version here: Galaxy S6 edge plus Stock Firmware
Instructions: How to Install Galaxy S6 edge+ Stock Firmware


  1.  Run Odin on your PC desktop
  2. Reboot the Galaxy S6 edge+ into Odin download mode.
    Turn it off, once completely shut down  hold down the ‘HOME’ + ‘VOLUME DOWN’ buttons and press the ‘POWER’ button for about 2 seconds until a WARNING! Screen appears. Press the ‘VOLUME UP’ button to continue or enter Download Mode.
  3. Connect the phone to PC via USB. Then make sure you can see as phone “Added” in Odin log box or highlight the COM:ID once the device is detected,
  4. In Odin window, Do Not ever tick ‘RE-Partition’ , just leave the ‘Auto Reboot’ and ‘F. Reset Time’ mark as checked.
  5. Load each firmware packages in Odin’s designated buttons.
  6. Click on the “Start” button to flash the stock firmware
  7. Wait until the flashing successfully finishes, you’ll just see a word ‘PASS’ in Odin.

Perform Factory Data Reset (optional)

To obtain a much more fluid and fresher firmware installation, you may  necessarily perform the Full Wipe/Factory Data Reset on your Galaxy S6 edge plus. This will get rid of any lag issues especially if your Galaxy S6 edge plus has been rooted and it has loads of modified system images.
  1. Make sure to make a backup copy of your stored data in the phone’s memory.
  2. Turn off the phone and set it into recovery mode.
  3. Press and hold Volume Up, Home and Power buttons.
  4. Once in recovery mode, perform full wipe
    Select ‘Wipe Data/Factory Reset’
  5. Lastly select ‘Reboot System  Now”  and wait until the phone completely reboot.